We offer asbestos-free braided packing for dynamic and static sealing. State the cross-section, medium, temperature and pressure so that the correct product code can be selected.
Gland packing, also known as sealing cord, consists of braided fibre cords made from materials such as PTFE, aramid or graphite, with or without lubricant impregnation. It is used in the glands of centrifugal pumps, valves, agitators and other fittings to provide a dynamic seal around a moving shaft.
Construction: braided, cross-braided or square-braided. Square cross-section. The size is selected to suit the gland.
Materials: expanded graphite, up to +550°C in steam; graphite-filled PTFE, product 2810 for chemical applications; aramid fibre for abrasion; and PTFE-impregnated ramie for low-temperature water.
Main types of gland packing:
We manufacture moulded graphite rings from flexible graphite for sealing spindle and shaft glands in valves, fittings and pumps.
Selection by medium, motion and gland design:
Glands in pumps, valves, fittings, agitators and mills. Selection depends on the medium, type of motion and gland design.
Sealing manholes, chemical tanks and hatches.
Applications in the chemical, petrochemical, paper, dyeing and fertiliser industries.
Applications in power generation, mining, municipal services and the sugar industry.
The Anbi-Tech catalogue includes the following product codes:
We base product selection on the medium, type of motion and gland design.
| Product code or product | Operating temperature | Density | Shaft speed | pH range | Rotary pressure | Oscillating pressure | Static pressure |
|---|---|---|---|---|---|---|---|
| 2311 | -130 to +270°C | 1.6 | 10 m/s | 0-14 | 10 bar | 100 bar | 100 bar |
| 2311 S | -40 to +280°C | 1.7 | 15 m/s | 0-14 | 10 bar | 20 bar | 200 bar |
| 2412 | -200 to +280°C | 1.65 | 8 m/s | 0-14 | 50 bar | 200 bar | 400 bar |
| 2810 | -200 to +280°C | 1.65 | 20 m/s | 0-14 | 20 bar | 150 bar | 200 bar |
| 2113 | -240 to +450°C, up to 650°C in steam | 1.2 | 40 m/s | 0-14 | 40 bar | not applicable | 200 bar |
| 2104 | -240 to +280°C | 1.3 | 20 m/s | 0-14 | 25 bar | not applicable | 150 bar |
| 2121 | -240 to +600°C, up to 650°C in steam | 1.1 | 2 m/s | 0-14 | not applicable | not applicable | 320 bar |
| 2900 | -240 to +500°C, up to 600°C in steam | 1.2 | 20 m/s | 0-14 | 50 bar | 150 bar | 200 bar |
| 2114 | -240 to +450°C, up to 650°C in steam | 1.15 | 30 m/s | 1-14 | 50 bar | not applicable | 500 bar |
| 2100 | -240 to +600°C, up to 650°C in steam | 1.2 | 1 m/s | 0-14 | not applicable | not applicable | 500 bar |
| 2710 | -100 to +280°C | 1.5 | 20 m/s | 2-12 | 15 bar | 120 bar | 120 bar |
| 2840 | -100 to +280°C | 1.6 | 25 m/s | 2-12 | 50 bar | 100 bar | 300 bar |
| 2401 | -100 to +280°C | 1.6 | 12 m/s | 2-12 | 30 bar | 150 bar | 180 bar |
| 2402 | -150 to +280°C | 1.6 | 15 m/s | 2-12 | 30 bar | 200 bar | 300 bar |
| 2403 | -150 to +280°C | 1.5 | 15 m/s | 2-12 | 30 bar | 200 bar | 300 bar |
| 2220 | -30 to +260°C | 1.5 | 12 m/s | 5-11 | 20 bar | 100 bar | 100 bar |
| Moulded graphite rings | up to +600°C | 1.3-1.6 | – | 0-14 | – | – | – |
The technical data provided are a guide for material selection and do not guarantee that the packing will perform correctly under particular conditions.
| Product code | 2311 |
|---|---|
| Material | pure PTFE yarn |
| Operating temperature | -130 to +270°C |
| Density | 1.6 |
| Impregnation | PTFE |
| Shaft speed | 10 m/s |
| Lubrication | none |
| pH range | 0-14 |
| Applications | food, chemical and pharmaceutical industries, drinking-water treatment plants and oxygen installations; resistant to oils, steam, fuels and solvents |
| Rotary pressure | 10 bar |
| Oscillating pressure | 100 bar |
| Static pressure | 100 bar |
| Product code | 2311 S |
|---|---|
| Material | pure PTFE yarn with silicone oil |
| Operating temperature | -40 to +280°C |
| Density | 1.7 |
| Impregnation | PTFE |
| Shaft speed | 15 m/s |
| Lubrication | yes |
| pH range | 0-14 |
| Applications | food, chemical and pharmaceutical industries and drinking-water treatment plants; resistant to water, steam, oils and fuels |
| Rotary pressure | 10 bar |
| Oscillating pressure | 20 bar |
| Static pressure | 200 bar |
We confirm the material composition for this product code when the order is placed.
| Product code | 2412 |
|---|---|
| Operating temperature | -200 to +280°C |
| Density | 1.65 |
| Shaft speed | 8 m/s |
| Lubrication | silicone oil |
| pH range | 0-14 |
| Applications | chemical and petrochemical industries, power generation, mining, municipal services, pharmaceutical, food and sugar industries |
| Rotary pressure | 50 bar |
| Oscillating pressure | 200 bar |
| Static pressure | 400 bar |
| Product code | 2810 |
|---|---|
| Material | PTFE yarn with graphite and silicone oil |
| Operating temperature | -200 to +280°C |
| Density | 1.65 |
| Impregnation | PTFE |
| Shaft speed | 20 m/s |
| Lubrication | silicone oil |
| pH range | 0-14 |
| Applications | chemical, paper and dyeing industries, fertiliser production, and contact with water, steam, oils and acids other than very strong oxidising acids |
| Rotary pressure | 20 bar |
| Oscillating pressure | 150 bar |
| Static pressure | 200 bar |
| Product code | 2113 |
|---|---|
| Material | pure expanded graphite yarn |
| Operating temperature | -240 to +450°C, up to 650°C in steam |
| Density | 1.2 |
| Impregnation | none |
| Shaft speed | 40 m/s |
| Lubrication | none |
| pH range | 0-14 |
| Applications | for pumps handling chemically aggressive media in power generation and for sealing high-temperature boiler feed pumps in the petrochemical industry; it can replace graphite rings |
| Rotary pressure | 40 bar |
| Oscillating pressure | not applicable |
| Static pressure | 200 bar |
| Product code | 2104 |
|---|---|
| Material | expanded graphite yarn |
| Operating temperature | -240 to +280°C |
| Density | 1.3 |
| Impregnation | none |
| Shaft speed | 20 m/s |
| Lubrication | PTFE dispersion |
| pH range | 0-14 |
| Applications | for centrifugal pumps, valves and fittings in the chemical and energy industries, in contact with water, oils, steam, solvents and acids other than strong oxidising acids |
| Rotary pressure | 25 bar |
| Oscillating pressure | not applicable |
| Static pressure | 150 bar |
| Product code | 2121 |
|---|---|
| Material | pure expanded graphite yarn |
| Operating temperature | -240 to +600°C, up to 650°C in steam |
| Density | 1.1 |
| Impregnation | reinforced with fine Inconel wire |
| Shaft speed | 2 m/s |
| Lubrication | none |
| pH range | 0-14 |
| Applications | for valves operating at very high temperatures and pressures in contact with steam, oils and acids other than strong oxidising acids |
| Rotary pressure | not applicable |
| Oscillating pressure | not applicable |
| Static pressure | 320 bar |
| Product code | 2900 |
|---|---|
| Material | carbon yarn |
| Operating temperature | -240 to +500°C, up to 600°C in steam |
| Density | 1.2 |
| Impregnation | none |
| Shaft speed | 20 m/s |
| Lubrication | PTFE dispersion |
| pH range | 0-14 |
| Applications | for centrifugal pumps, valves and fittings in the chemical and energy industries, in contact with water, oils, steam, solvents and acids other than strong oxidising acids |
| Rotary pressure | 50 bar |
| Oscillating pressure | 150 bar |
| Static pressure | 200 bar |
| Product code | 2114 |
|---|---|
| Material | pure expanded graphite yarn |
| Operating temperature | -240 to +450°C, up to 650°C in steam |
| Density | 1.15 |
| Impregnation | none |
| Shaft speed | 30 m/s |
| Lubrication | none |
| pH range | 1-14 |
| Applications | for valves operating at very high temperatures and pressures in contact with steam, oils and acids other than strong oxidising acids |
| Rotary pressure | 50 bar |
| Oscillating pressure | not applicable |
| Static pressure | 500 bar |
| Product code | 2100 |
|---|---|
| Material | natural expanded graphite yarn |
| Operating temperature | -240 to +600°C, up to 650°C in steam |
| Density | 1.2 |
| Impregnation | CrNi Inconel mesh |
| Shaft speed | 1 m/s |
| Lubrication | none |
| pH range | 0-14 |
| Applications | for contact with steam, oils and acids other than strong oxidising acids; chemical and petrochemical industries; valves and fittings handling chemically aggressive media; resistant to oils |
| Rotary pressure | not applicable |
| Oscillating pressure | not applicable |
| Static pressure | 500 bar |
| Product code | 2710 |
|---|---|
| Material | PTFE-coated aramid yarn |
| Operating temperature | -100 to +280°C |
| Density | 1.5 |
| Impregnation | PTFE with paraffin oil |
| Shaft speed | 20 m/s |
| Lubrication | silicone |
| pH range | 2-12 |
| Applications | chemical and petrochemical industries, power generation and mining; recommended for highly abrasive media such as suspensions of sand, sewage and other solids |
| Rotary pressure | 15 bar |
| Oscillating pressure | 120 bar |
| Static pressure | 120 bar |
| Product code | 2840 |
|---|---|
| Material | chopped aramid yarn with graphite dispersion |
| Operating temperature | -100 to +280°C |
| Density | 1.6 |
| Impregnation | graphite |
| Shaft speed | 25 m/s |
| Lubrication | yes |
| pH range | 2-12 |
| Applications | for high-pressure operation in contact with water, steam, salt solutions, moderately strong acids and alkalis, and organic media such as fuels, oils, lubricants and solvents |
| Rotary pressure | 50 bar |
| Oscillating pressure | 100 bar |
| Static pressure | 300 bar |
We confirm the material composition for this product code when the order is placed.
| Product code | 2401 |
|---|---|
| Operating temperature | -100 to +280°C |
| Density | 1.6 |
| Shaft speed | 12 m/s |
| Lubrication | silicone |
| pH range | 2-12 |
| Applications | food, chemical and pharmaceutical industries and drinking-water treatment plants; resistant to water, steam, oils, fuels, solvents, acids and alkalis other than strong oxidising agents |
| Rotary pressure | 30 bar |
| Oscillating pressure | 150 bar |
| Static pressure | 180 bar |
| Product code | 2402 |
|---|---|
| Material | PTFE yarn with graphite, aramid yarn and silicone oil |
| Operating temperature | -150 to +280°C |
| Density | 1.6 |
| Impregnation | none |
| Shaft speed | 15 m/s |
| Lubrication | silicone |
| pH range | 2-12 |
| Applications | for water, oils, fuels, solvents, and moderately strong acids and alkalis; used in the chemical, fertiliser and food industries |
| Rotary pressure | 30 bar |
| Oscillating pressure | 200 bar |
| Static pressure | 300 bar |
| Product code | 2403 |
|---|---|
| Material | PTFE yarn with graphite, aramid yarn and silicone oil |
| Operating temperature | -150 to +280°C |
| Density | 1.5 |
| Impregnation | none |
| Shaft speed | 15 m/s |
| Lubrication | silicone |
| pH range | 2-12 |
| Applications | chemical, fertiliser and food industries; equipment operating with water, hot water, salt solutions, most acids and alkalis, fuels, oils and solvents, and suspensions of solid particles in these media |
| Rotary pressure | 30 bar |
| Oscillating pressure | 200 bar |
| Static pressure | 300 bar |
| Product code | 2220 |
|---|---|
| Material | ramie yarn with PTFE impregnant |
| Operating temperature | -30 to +260°C |
| Density | 1.5 |
| Impregnation | PTFE |
| Shaft speed | 12 m/s |
| Lubrication | none |
| pH range | 5-11 |
| Applications | for pump, valve and fitting glands in all industries and municipal services, in contact with water, oils, fuels, lubricants and solvents; resistant to aqueous solutions of salts, weak acids and weak alkalis |
| Rotary pressure | 20 bar |
| Oscillating pressure | 100 bar |
| Static pressure | 100 bar |
| Material | pressed flexible graphite |
|---|---|
| Operating temperature | up to +600°C |
| Density | 1.3-1.6 |
| pH range | 0-14 |
| Applications | for sealing spindle and shaft glands in district-heating, chemical and petrochemical valves and fittings, centrifugal pumps and high-pressure valves and fittings |
The technical data provided are a guide for material selection and do not guarantee that the packing will perform correctly under particular conditions.
Selecting packing requires the medium, type of motion and gland design to be specified.
Send an enquiry
Provide the gland dimensions, including cross-section and length, medium, temperature and pressure, and we will prepare a quotation.
ANBI-TECH Sp. z o.o., Olewin 50A, 32-300 Olkusz. Telephone +48 32 788 70 10. Email: anbi@anbi-tech.pl.
Aramid is a fibre made from aromatic polyamides, with high tensile strength and resistance to high temperatures. In gland packing, it is used for abrasive media, including suspensions of sand and sewage. The packing catalogue lists aramid products 2710 and 2840. Selection depends on the medium, type of motion and gland design.
Depending on the material and parameters of the specific product code, gland packing is used in pump, valve and fitting glands and around shafts and spindles, among other applications. It must be matched to the medium and operating conditions.
Provide the medium, temperature, pressure, type of motion or shaft speed, and the required cross-section or gland dimensions. Selection is made for a specific product code because parameters vary between packing products.
We publish references we have received and reviews from the ANBI-TECH business profile on Google Maps. The English versions are faithful translations of the Polish originals.
I can wholeheartedly recommend Anbi-Tech as a reliable and professional partner in machining and in manufacturing parts for the pharmaceutical industry. This is the third company where I have had the pleasure of working with Anbi-Tech, and the cooperation has been of the highest standard every time.
The pharmaceutical industry is exceptionally demanding: precision, on-time delivery, material quality and a full understanding of the customer’s needs all matter. Anbi-Tech has repeatedly proved that it is very well suited to this environment. The company has manufactured change parts, spare parts, filling needles, conveyor screws, components for dispensing powders and liquids, and many other production components for us.
The quality of the parts deserves particular recognition, whether they are made from 316L and 304 stainless steel or plastics such as POM, polyurethane and polycarbonate. The components are manufactured to a very high standard, with close attention to accuracy and detail, which is crucial in our industry.
Anbi-Tech has literally ‘saved our skin’ on many occasions in emergencies where time, a rapid response and a flexible approach to the customer mattered. A major strength of the company is its modern machinery, which enables it to complete even highly demanding projects while maintaining the highest standard of workmanship.
The people are equally important: the company’s staff always show complete commitment and a willingness to cooperate and provide technical support. Their extensive experience, professionalism and collaborative approach to customers are clear to see.
In pharmaceuticals, the ‘paperwork’, meaning certificates, is also important. The certificates have never been questioned during customer or regulatory audits, for example by GIF.
I strongly recommend working with Anbi-Tech to any company looking for a proven, reliable and quality-focused technical partner.
Dariusz Stachowicz, Senior Maintenance Manager, Polfa Warszawa S.A.
We had a very good experience working with Anbi-Tech on a new production line project for a bottling plant. Using a bottle sample and components from the old line, its engineer prepared the design and documentation for new change parts in SolidWorks. Anbi-Tech then manufactured timing screws, star wheels, drive components, bottle orienters, bottle turners and feeding components, among other items.
A major advantage is the end-to-end approach, from analysis and design through to the manufacture of finished components. Their considerable technical experience, precision and ability to solve unusual problems are clear. I recommend them.
Bartłomiej Ć, Specialist, ORLEN
We work with Anbi-Tech to manufacture parts and technical components for our projects. We value them above all for their workmanship, on-time delivery and excellent communication. When requirements are unusual, they can advise us and find a solution instead of simply manufacturing a part from a drawing. A reliable partner that I am happy to recommend.
Marek P., Production Manager, Triccor
A reliable company with extensive experience! They manufacture parts from steel, aluminium and specialist plastics such as POM and PTFE. Every service, whether turning, milling or CNC cutting, is carried out perfectly and with attention to the smallest detail. Excellent communication, professional advice and consistently on-time delivery. I wholeheartedly recommend them to anyone who needs reliable components.
Damian Lab
For a quotation, send a PDF or DXF drawing or a STEP model with dimensions. State the material, the number of pieces and the quality requirements. A photograph of the part alone, without dimensions, does not allow a reliable quotation to be prepared.
If the project combines several operations, we will agree the scope of machining, inspection, assembly and processes carried out by partners.
Tel.: +48 32 788 70 10
Mobile: +48 693 726 777
Mobile: +48 693 726 127
Olewin 50A, 32-300 Olkusz
VAT ID: PL6372190715
anbi@anbi-tech.pl